Tom's Hardware > Forum > Overclocking > CPUs > [Solved] Sabertooth 990FX and 1055T over clocking, runs hot. Like to hit 4ghz

[Solved] Sabertooth 990FX and 1055T over clocking, runs hot. Like to hit 4ghz

Forum Overclocking : CPUs [Solved] Sabertooth 990FX and 1055T over clocking, runs hot. Like to hit 4ghz

AMD

Bottom Search this thread

I got a Sabertooth 990fx installed a 1055T and overclocked it to 3.8ghz. vcore 1.404 and most of the other settings are set to auto. Can anyone give me some help to get this cpu to 4ghz please.

Message edited by jewals11 on 01-01-2012 at 09:44:22 PM

Reply to jewals11

Got this posted under '1155t' so l thought l would post it here with the proper name.

Message quoted 1 times
Message edited by jewals11 on 01-01-2012 at 09:46:16 PM

Reply to jewals11

jewals11 wrote :

Got this posted under '1155t' so l thought l would post it here with the proper name.

I have the 1055T @3849mhz very stable, here is a screen shot.

I might be able to get to 3900mhz on air; l will try.

Reply to jewals11

4.0 / 4.1 / 4.2 GHz all of this is so achievable with the 1055T and all the Phenom II x4/x6.

Message quoted 1 times

------------------------------

http://valid.canardpc.com/cache/banner/2072561.png

Reply to ilysaml

ilysaml wrote :

4.0 / 4.1 / 4.2 GHz all of this is so achievable with the 1055T and all the Phenom II x4/x6.

My problemb is mine wont go past 3.8 GHZ at all I am using a NH-d14 cpu coler.

Reply to jchambers2586

What settings do you set ?

Message quoted 1 times

------------------------------

Reply to ilysaml

ilysaml wrote :

What settings do you set ?

Here is what I have set in the UEFI

http://imageshack.us/f/810/120117120806.png/

http://imageshack.us/f/688/120117120836.png/

http://imageshack.us/f/11/120117120848.png/

Reply to jchambers2586

Best answer

Here's my settings;
CPU Multi x14
CPU FSP 286
HT & NB Multipliers x7 (2002 MHz)
CPU NB VID +50 (1.2V)
CPU VCore (1.5V)

Set the RAM voltages & timings to the recommended labeled on the sticks

Message quoted 1 times

------------------------------

Reply to ilysaml

ilysaml wrote :

Here's my settings;
CPU Multi x14
CPU FSP 286
HT & NB Multipliers x7 (2002 MHz)
CPU NB VID +50 (1.2V)
CPU VCore (1.5V)

Set the RAM voltages & timings to the recommended labeled on the sticks

I tried with those settings the board will not post. It seems like I got a bad CPU for over clocking at the higher speeds.

Reply to jchambers2586

No it doesn't go like this, and the Motherboard is the main issue, the settings you set is the secondary issue.

I didn't have any post when i tried to OC above 3.6, until i reached the 4.0 GHz step by step. Any wrong voltages in the DRAM or the CPU NB VID won't make the PC post. So find the latest stable OCing and try to raise up the CPU FSB , voltages step by step.

List all your settings like i did above, and let me see what you got.

------------------------------

Reply to ilysaml