790FX-GD70 + Memory mhz confusion ???

I am woking on building a AMD 965BE.v2 system with this board but i am a little confused on the memory.

With this board it says it supports DDR3 up to 1333 each slot, it also says it can go 1333+ OC, however this is marked with a * at the end.

http://eu.msi.com/index.php?func=p [...] od_no=1740

My confusion is.
If i purchase DDR3 at 1600 or more, will the mobo only limit it to 1333 at first then i have to OC to required speed.
Also the main confusion is that will it allow me to have all 4 slots OC to 1600+ or like the old AM2+ DDR3 boards which only allowed 1 slot of each channel to be OC to 1333+
Besicly i want to know if i should get some 1600 or 1333.

I know that it should be high speed low latency but can i get some yay or nay on these memory sticks or if you have recommendation.

http://www.overclockers.co.uk/show [...] ubcat=1516
http://www.overclockers.co.uk/show [...] ubcat=1517
http://www.overclockers.co.uk/show [...] ubcat=1517

The only thing the board is going to do for you is supply the voltage. The memory controller is on the CPU, and what it will do is the luck of the draw.

You will be limited to two slots as far as I know, unless this new CPU is radically different.

I doubt you will get it to run at 1600, but you can get that if you want. Might come in handy in the future.

The OCZ Gold kit you listed should be CL8 not 7 as it says...
http://www.newegg.com/Product/Prod [...] -_-Product

But either one really. All three choices are fine.

You might not be able to achieve 1600Mhz but you will be able to overclock the RAM a bit by raising your FSB. Remeber, lower timings are more important than MHZ, so try and get sticks that have the lowest timing possible and you should be fine.

I have now sellected OCZ Platinum Low Voltage 4 x 2 GB DDR3-1333 PC3-10666 PC Memory Modules (OCZ3P1333LV4GK) due to its low latancy of 7-7-7-7-20 and ofc low voltage due to mobo recommending 1.5v.

I have the same set-up but ram is Corsair DDR3 1600. I want to run 8 gigs myself. Could you please explain what, I need to do to run at 1333MHZ? For example the voltage Etc. Any help would be greatly appreciated. I've heard of people putting only one ramm module for start up. What did you do?

I am currently on a 965 be running four 1gb sticks at 1700mhz easy (1T) on a 790fx-gd70 with the voltage at 1.9v. This ram some say will pull 1800mhz.