I need to install a Sunbeam Core Contact Freezer, but the fan rests on the memory in Dimm_A1. Is there any other way to set up the memory to leave A1 open?

I have:
2X Kingston DDR2 800 mhz 1gig PC2-6400 in A1 and B1 (yellow slots)
slots A2 and B2 are open (black slots.)

Settings:
667 mhz
6-6-6-18
unganged
ECC off

In the manual, the recommended setup is:
...............A1.......A2.......B1......B2
Single..........................Pop
Single.....Pop
Dual (1)..Pop................Pop
Dual (2)..Pop.....Pop.....Pop.....Pop

thanks in advance

you can use a2 b2, as long as you insert the memory in the same colored slots, you will be dual channel

cool thanks.