A research team in Japan says it has successfully demonstrated for the first time in the world in a solid-state device one of the two basic building blocks that will be needed to construct a viable quantum computer. Read more
The U.S. Read more
GT Interactive has announced the U.S. Read more
Elitegroup Computer Systems (ECS) has launched a desktop computer built into an LCD panel, aiming it at students and first-time computer buyers. Read more
While Intel and VIA are battling for the low-power market, an optimized desktop motherboard and an efficient processor can already take your idle power down to almost 30 W, while still providing solid performance. We put Intel's G31 chipset to the task. Read more
Gaming enthusiasts always look for an edge, but that edge usually comes at a cost--time or money. We compare three systems from HP, Falcon NW, and Vigor aimed at gamers with more money than time. Read more
In the horsepower race between Intel’s and AMD’s quad-core chips, the Atom processor is an everyday hybrid. Shuttle took it and created a pint-sized small for factor box. Is it powerful enough to be your daily-use desktop, though? Read more
How much extra performance can you get from a simple graphics driver update? And what sort of gaming gains can you expect from a high-end graphics card when you overclock your CPU? Read more
Tom's Hardware UK and Ireland Forums »
Homebuilt Systems
»
New System Build »
Building a Computer for the First Time Please Adivise Me
| Bottom | |
|---|---|
| Author |
Thread : Building a Computer for the First Time Please Adivise Me
|
|
Profile: stranger
More Information
|
Mother Board
|
|
Related Product
|
|
For great justice!!
Profile: enthusiast
More Information
|
Motherboard is a waste of money for a variety of reasons. Unless you're planning on SLI, don't bother. Get an ASUS P5K EPU, great board with lots of features and 45nm support which makes your system a little more "future proof".
Message edited by resonance451 on 06-29-2008 at 08:36:53 PM --------------- Intel qx9650 + EVGA 780i SLI mobo EVGA 8800GT 512mb, OCZ DDR2 1066MHz 4gb OCZ 850W PSU, WD 500GB SATA HDD (x2) CM Stacker 830 SE Sound setup: FireFace 800, JBL 4328 speakers |
|
Profile: member
More Information
|
I would stay with 64bit Vista if I were you, I've had it for awhile with absolutely no problems and there's the option to upgrade to 8GB. I have 4GB of RAM and Vista 64bit runs fine. |
|
For great justice!!
Profile: enthusiast
More Information
|
The 64-bit has a larger memory address, so it takes up more space for the programs it is running. Don't bother getting 64-bit just to detect the 512mb ram which will be wasted anyways.
--------------- Intel qx9650 + EVGA 780i SLI mobo EVGA 8800GT 512mb, OCZ DDR2 1066MHz 4gb OCZ 850W PSU, WD 500GB SATA HDD (x2) CM Stacker 830 SE Sound setup: FireFace 800, JBL 4328 speakers |
|
[Random, very funny quote]...[Something cool to sa
Profile: member
More Information
|
Hide
Display/Hide instant messengers
It's ur first pc build?
|
|
Profile: Honorary Poster
More Information
|
The parts you posted should work fine, with no changes. If your intended use is heavy multitasking, then the quad is good, although I like the 45nm parts better because they run cooler. The 9800GTX is fine, but a 9800GTX+ variant should appear in a week or so that will be using 55nm parts and should be better. I would get the EVGA card to preserve your option to use their "step-up" program if a much better card should show up within 90 days. The radeon 4850 is now getting good reviews at that price point also. The P35 motherboards now have stable bios'es. I prefer them, unless you want to do high overclocking. The Gigabyte DS3L and DS3R boards are good. A good quality PSU is important. Coolermaster is not highly regarded on this list:http://www.xtremesystems.org/forums/showthread.php?t=108088 I would look for a unit from seasonic, corsair, PC P&C, and maybe fortron or Antec on a lower budget. This is not the place to go cheap. Even the corsair 450vx http://www.newegg.com/Product/Prod [...] rder=PRICE should do the job. Buy.com sometimes has the corsair units at very good prices. Any 7200rpm hard drive will be good, there are only minor differences in performance because of cache..etc.. . If you only need 250gb, then get that. If you might need more, then the extra capacity of a larger drive is a good buy up front. If you want to splurge a bit, consider the new WD 300gb velociraptor at $300. It is noticeably faster. The corsair memory is good. C2D processors don't need anything faster. Only if you plan on high overclocks should you pay for faster speed. For a new build, and your parts, vista 64 bit will not be a problem for drivers. The only category of programs that have trouble on 64 bit are old 16 bit dos programs. Vista was designed to utilize the large, cheap memory that we have today. Stick with Vista-64 Shopping tips for Vista: I would not buy a ide dvd burner today. Look at the Samsung 203B sata unit. Sata cabling is much easier, and the burner is even cheaper. I like the Antec 900. I would suggest installing an aftermarket cooler initially. They are not expensive, and will keep your cpu cooler with less noise. Look for a unit with a large 120mm slow turning fan. I like the tower units that direct the hot air out the back of the case. There are many, and any will do the job. If you are buying a monitor, get the best you can afford. It is the most important thing you will touch on your computer every day. Better, yet, get two of them. ---good luck--- Message edited by geofelt on 06-29-2008 at 10:05:27 PM --------------- E8400-stock, GA-P35-DS3R(rev2.1), Corsair 4x2gb 6400C5, EVGA 8800GTS-512-G92, Vista home premium-64-bit, WD velociraptor-300gb, PC P&C silencer-610, Antec SOLO, 2 x Samsung 275T, Samsung-203b-dvd |
|
Profile: nimble knuckle
More Information
|
I would get the P5Q-Pro or P5Q deluxe for motherboard instead of the P5K. The P5Q-Pro and P5Q deluxe are P45 chipsets where as the P5K is p35. |
|
Profile: stranger
More Information
|
Thank you for your help heres the changes that I have made
|
|
Do not eat the styrofoam
Profile: Forum Fixture
More Information
|
Write the part names, not just the links. You'll get answers from more people that way - most of us hate to click 10 links to see what you've picked. Get the 64-bit Vista, not 32-bit. SH-S203B/Antec900/550VX/G.Skill 2x2GB DDR2-800/Q6600 - good ideas. Maybe RC-690 instead of Antec 900 if you hate the lights.
Graphic card: Message edited by aevm on 07-04-2008 at 10:30:00 PM |
|
Profile: stranger
More Information
|
Thanks for the computer build and posting advice. Unless anything is wrong or anyone can make my build stronger by reducing the price or increasing it less than $100 this will be my final draft of my build and I will order mt parts today. Also if any thinks I need to buy extra cooling please also post that or anything else to ensure that my build will work.
|
Tom's Hardware UK and Ireland Forums »
Homebuilt Systems
»
New System Build »
Building a Computer for the First Time Please Adivise Me
