Tom's Hardware UK and Ireland Forums » Motherboards & Memory » Memory » P5Q 4 x 2 gb Corsair, no boot
 

P5Q 4 x 2 gb Corsair, no boot

Advanced Search

Other : Wingding Games General : mothhive Motherboards & Memory : fedtmusen Applications : virtualban and 276 unknown users
Add a reply



 Word :   Username :  
 
Bottom
Author
 Thread : P5Q 4 x 2 gb Corsair, no boot
 
andersonx2 c
Profile: stranger
More Information
n°1776439
07-04-2008 at 12:58:09 PM

Hello

I have this setup:
Q9450
ASUS P5Q
4 x 2 gb Corsair Twin2x4096-6400C5
8800 GT

The computer wont boot with all 4 x 2 gb ram. Only with 2 x 2 gb in the B1 and B2 dimm. It wont work in A1 and A2 dimm.

All settings in the bios is "auto". How should I set up the bios in order for this to work? Or will it work at all?

Related Pr oduct
 Register or log in to remove.

akhilles
Profile: Forum Veteran
More Information
n°1776447
07-04-2008 at 02:25:13 PM

It should, but some mobos are picky about ram & config. You can try, but you're not guarranteed. Put the ram in bootable slots, up vdimm to specs (google) voltage, switch the ram channels after.

andersonx2 c
Profile: stranger
More Information
n°1776450
07-04-2008 at 02:30:50 PM

Thanks for answering so quickly - but I´ve already tried that. When I switch back or puts in all the ram i fails to boot.

Have you got other suggestions?

th_usernam e
Profile: addict
More Information
n°1776648
07-05-2008 at 09:50:09 PM

check power cables

andersonx2 c
Profile: stranger
More Information
n°1776658
07-05-2008 at 10:31:05 PM

Yes I have done that. You see, it runs with the ram sticks in channel B but not A. That is not caused by the power cables, is it?


Go to:
Add a reply
  Tom's Hardware UK and Ireland Forums » Motherboards & Memory » Memory » P5Q 4 x 2 gb Corsair, no boot
 

Forum map
MyDiscussions.Net Forum, Version 2007.1
© 2000-2006 No1Dev
Page generated in 0.207 seconds
Google ads