Tom's Hardware UK and Ireland Forums » Motherboards & Memory » Tyan » S2915 Thunder Rev1.0 Pre/Post Booting Issue
 

S2915 Thunder Rev1.0 Pre/Post Booting Issue

Advanced Search

Graphic & Displays : pipespinner and 96 unknown users
Add a reply



 Word :   Username :  
 
Bottom
Author
 Thread : S2915 Thunder Rev1.0 Pre/Post Booting Issue
 
Profile: stranger
More Information

Gday Gday ,

We recently put together four tyan rigs ;

2x Amd Opteron Quad Core 2356 Socket F 1207
Tyan S2915 Thunder (n6650W) boards
4x ATP 4GB DDR2-667 ECC RAM (samsung chips)
1x Antec TruePower Quattro 1000W PSU ( EPS12V v2.91 and ATX12V standard)

Have tried 2 of ATI RV630 HD 2600 pciE card
and Leadtek winfast PX8800gts pciE card
and Gigabyte GV-RX30HM256DP-RH pciE card

Chenbro Black 3U 19” Rack-mount Chassis for ATX/EATX

Have plugged in the required EPS12V 24pin + 8pin + 4pin power plugs for mainboard and pciE (8800gts) only

CPU's seem to be installed correctly.
Haven''t got any SATA or pciE nics or cdrom's plugged in

Have read the mainboard book for ddr2 ram installation.
Have tried single and dual ram setup's in
DIMM1 + DIMM2 and DIMM2 + DIMM3 (this is on the mainboard
and in the book it shows as DIMM 0 + 1 + 2 + 3)

Basically i can sometimes get a PRE BIOS post of the video card's
but after that the screen goes blank.

I do get one Short hi-pitched beep with ram in One Bank (DIMM) of ram

One long beep and one short beep with Two Bank's DIMM 2and3 OR DIMM 1and2
No other beep's and that's it

*Have tried different ram, different banks + reseating, 4 different video cards
mentioned, checked all the plugs, different power supply.
Have tried video cards in pciE 8x and pci16x slots
Plus tried PS2 and USB Keyboards, but get error No keyboard

Read the mainboard manual and the online one back to front

Can't think of anything else to check or do

Been building comps/servers for quite some years and checked stuff
inside and outside and got two others 2 check also.

Any help or assistance would be great,

Thanking you

Regards
Paul - UTBox

Related Pr oduct
Register or log in to remove.

Profile: stranger
More Information

After speaking to various people, it is clear that the opteron 2356 cpu is not supported
with the old bios firmware version

http://www.tyan.com/support_downlo [...] ocketid=16

Contacted the vendor who spoke to TYAN and it is a bios/cpu support issue because its version 1.0

It's getting sent back so they do the bios firmware upgrade to version 2.0 and test
thanks very much for your help

if anyone else gets the opteron 2356 or the tyan s2915 thunder n6650w, check the cpu support before purchasing

cheers

paul - utbox


Go to:
Add a reply
  Tom's Hardware UK and Ireland Forums » Motherboards & Memory » Tyan » S2915 Thunder Rev1.0 Pre/Post Booting Issue
 

Google ads