Tom's Hardware UK and Ireland Forums »
Motherboards & Memory
»
Abit »
$50 for whoever fixes my problem
| Bottom | |
|---|---|
| Author |
Thread : $50 for whoever fixes my problem
|
|
Profile: stranger
More Information
|
Let me start by saying i think i've exhausted all possible solutions besides buying a whole new mobo, cpu, and ram. I play three games WoW, and more recently Call of Duty 4, and TF2. I'm pretty sure the problem I am currently having has been happening for a while, but its not as noticeable in WoW. When I hop on any FPS its very difficult to play with. My computer will run fine for 10-20 mins after start up, around 70 FPS in TF2 and COD4 at max setting. Then all of the sudden I can watch the graphics get super choppy. It becomes unplayable and I just get frustrated. My computer specs are currently...
Message edited by berger103 on 06-06-2008 at 11:46:08 PM |
|
Related Pr oduct
|
Register or
log in to remove.
|
|
Never let your friend down
Profile: enthusiast
More Information
|
your processor is under powered. you need at lest a 2.00ghz processor in my opinon. maybe not if your running xp but definatly if you have vista. its not your graphics card. you might be having a problem with your psu. but i think its your processor. what os do you run? Message edited by ilovebarny on 06-06-2008 at 11:54:57 PM |
|
Never let your friend down
Profile: enthusiast
More Information
|
i think after reading your post agin that your psu is broken. they are not supposed to clank. |
|
Profile: newbie
More Information
|
yea, psu clanking is not a good sign. Try a different psu. The cpu is slow but it shouldn't all of a sudden slow down to 10fps when it was doing 70 before. Make sure your hdd is not full too, check page file memory too, it should be around 1-2gb. Message edited by jplum1556 on 06-07-2008 at 12:01:20 AM |
|
Never let your friend down
Profile: enthusiast
More Information
|
what are you checking your temps with? |
|
Profile: member
More Information
|
If the psu is overheating due to a stuck fan, it could be sending unstable voltages to everything in the system. |
|
Profile: enthusiast
More Information
|
Well, I have much experience with your powersupply and I can tell you that your graphics card after some time is eating too much power for that particular supply. The problem with it is that it is a dual rail powersupply. Now, that may not be the only problem with your rig either. You need to overclock that processor without a doubt. What model is your processor? It really makes a difference on what you can do as far as overclocking. Games tend to like a high clock speed. They don't per se require a rocketship of a graphics card all the time, however, much of the grahpics performance is contingent upon a nice processor speed. I changed my powersupply to a single rail PSU. Mine in particular is a silencer 750, although corsairs VX series is a single rail design. The problem is that when you hit 3d gaming on any of those games it is trying to suck too much from the 20 amp rail and it is under powering. I don't think it is this alone though. It could also be loss of connectivity in the modular wires. Always a good idea to get a hardwired powersupply and with a single rail. See, if you go to pcpowerandcoolings website it will explain some powersupply myths. My silence replacing my ultra 550watt x2 never makes noise and it provides solid power. My opteron dual core is at 2.8 and clocking along wonderfully. I have an old x1900xt which will play all those games fine.
--------------- Gahleon Mod http://img340.imageshack.us/my.php [...] 023yj7.jpg http://img340.imageshack.us/my.php [...] 068gb0.jpg |
|
Profile: journeyman
More Information
|
My thoughts exactly. It might not be stuck. But if its "clanking," then the fan speed is probably slower than it's supposed to be therefore lowering you're airflow considerably. That in turn will lessen airflow through your PSU causing heat up, inconsistent voltages, and possible damage to your other components. Also, how's the airflow in your case? You need at least two 120mm fans (1 intake, 1 exhaust). I know you said you were monitoring your temps. But Northbridge temps are not standard in every temperature monitoring program. You need to find out what they are. If they're over 40-45* C, after you've been gaming for a while, then that could be your problem. Hope that helps!!! Message edited by ibuypower on 06-07-2008 at 12:48:31 AM |
|
Sniper
Profile: Forum Veteran
More Information
|
Please do not double post.
--------------- E2180 @3.2Ghz + P35DS3L +8400GS (700/475 OC) ![]() |
|
Profile: stranger
More Information
|
Do you have the AMD dual core optimizer installed? Its a bit of a long shot but you can get some odd problems without it. Message edited by oldjools on 06-07-2008 at 12:53:07 AM |
|
Profile: old hand
More Information
|
shadow just pwned you...
|
|
If can,can. If no can, no can.
Profile: enthusiast
More Information
|
Clanking noise and computer not synonymous.
|
|
Profile: stranger
More Information
|
The CPU is dual core so its really a 3.6 |
|
Rich and Chocolatey
Profile: old hand
More Information
|
thats not how it works silly. |
|
Profile: stranger
More Information
|
Definitely kidding yourself there, you have an AMD 64 3800X2 I guess... the 3800 speed rating gives you a pretty good idea of where you are. Nothing can give you 50/50 load balancing across the 2 cores even 90% of the time or do it efficiently especially games... yes 2 is better than 1 but not anywhere near twice as good. My 4200X2 clocked at 2.59ghz (socket 939) with 2gb OCZ DDR400 & an 8800GTS 512 runs COD4 effortlessly at 1600x1200 with the eye candy turned up so you should not have too much trouble in finding settings that will run it smooth.
|
Tom's Hardware UK and Ireland Forums »
Motherboards & Memory
»
Abit »
$50 for whoever fixes my problem
