Hi
I need some help with my CPU(opteron 165) and ram settings.......I know some steps in order to overclock:
(i want to reach 2.7 GHZ)........I think I know all the steps...but i don't really know how to apply them all correctly....(believe me, I tried hard).

cpu setttings:
hyper transfer frequency: 4X...(default auto) -OK
cpu frequency: 300.0 - (default 200.0) -OK
ddr voltage: auto - ?
cpu multiplier 9x -OK
cpu voltage auto - ?

memory settings(default settings):
memclock index value(mhz): 400Mhz(default) - ?
T CL :3 -?
tras :8T -?
trcd :3T -?
trp :3T -?
1T/2T mem timing :2T -?


I will appreciate it if I could get some answers on the fields marked with the "?".
I'm trying to overclock for weeks.

Thank you in advance

if your cpu doesnt boot into windows, raise the cpu voltage by .5V.

cpu frequency: 300.0 - (default 200.0) -OK
ddr voltage: auto - Leave it
cpu multiplier 9x

You should get 9x300=2.7Ghz
Lower your HTT to 3x.

Leave your memory timings alone if you only want to OC your CPU

how about the DDR timings? Don't I have to do anything?

Thanks alot

No, unless your pc won't boot or something.

http://www.tomshardware.com/forum/ [...] erclocking
This is a good guide

THX man......but the guide doesn't help me much.......i have different memory from that from the guide.....i tryed with several timing but it crashed.........