read/write error on smart media, advice please

Archived from groups: alt.comp.periphs.dcameras (More info?)

I have a fuji finepix 2800 camera, its been great till earlier this year.
I suddenly started to get errors after I had taken a photo..and the photo
could not be displayed on the viewer ( or subsequently downloaded to the
pc) and the viewer said read error. This happened while I was away on
holiday
Camera is about 2 years old, I tried both new batteries and a brand new
smart media card , still had the same problem.
Could this have been an effect of the heat while I was away? ( I was in
Death Valley for some of the time and it was hot!) Is it likely to have
been dust in the card slot? More likely to be a fault in the camera than
the media cards?

I have been told I can get a cleaner kit for the slot and the cards, does
anyone have any experience of these please?

Lots of questions, I know, but I am loath to spend out for a new camera,
without trying to find out what has caused the problem on this one. Any
advice appreciated

thanks in advance

--
Ticketty᧧

Archived from groups: alt.comp.periphs.dcameras (More info?)

Tickettyboo wrote:
> I have a fuji finepix 2800 camera, its been great till earlier this
> year. I suddenly started to get errors after I had taken a photo..and
> the photo could not be displayed on the viewer ( or subsequently
> downloaded to the pc) and the viewer said read error. This happened
> while I was away on holiday
> Camera is about 2 years old, I tried both new batteries and a brand
> new smart media card , still had the same problem.
> Could this have been an effect of the heat while I was away? ( I was
> in Death Valley for some of the time and it was hot!) Is it likely to
> have been dust in the card slot? More likely to be a fault in the
> camera than the media cards?
>
> I have been told I can get a cleaner kit for the slot and the cards,
> does anyone have any experience of these please?
>
> Lots of questions, I know, but I am loath to spend out for a new
> camera, without trying to find out what has caused the problem on
> this one. Any advice appreciated

Use a different set of freshly charged batteries.

Try reformatting the card in your camera. If you are using a card reader,
run DiskCheck and see if any errors occur when reading the card when it is
outside the camera.

I doubt very much that dirty contacts are causing a problem.
--

Mike Russell
www.curvemeister.com
www.geigy.2y.net

Archived from groups: alt.comp.periphs.dcameras (More info?)

On Sun, 24 Oct 2004 17:59:01 +0100, "Tickettyboo"
<tickettyboo@mail2oops.com> wrote:

>I have a fuji finepix 2800 camera, its been great till earlier this year.
>I suddenly started to get errors after I had taken a photo..and the photo
>could not be displayed on the viewer ( or subsequently downloaded to the
>pc) and the viewer said read error. This happened while I was away on
>holiday
>Camera is about 2 years old, I tried both new batteries and a brand new
>smart media card , still had the same problem.
>Could this have been an effect of the heat while I was away? ( I was in
>Death Valley for some of the time and it was hot!) Is it likely to have
>been dust in the card slot? More likely to be a fault in the camera than
>the media cards?
>
>I have been told I can get a cleaner kit for the slot and the cards, does
>anyone have any experience of these please?
>
>Lots of questions, I know, but I am loath to spend out for a new camera,
>without trying to find out what has caused the problem on this one. Any
>advice appreciated
>
>thanks in advance

I suspect an electronic failure. Send it in for repair.

Pj

Hi friend!
Use Mac photo recovery tool to get back your lost photos on the Mac system.