Tom's Hardware UK and Ireland Forums » Systems » Compaq » Presario 2700 (2710US) Power Problem (Heat?)
 

Presario 2700 (2710US) Power Problem (Heat?)

Advanced Search

Systems : Que CPU & Components : iluvgillgill, krazyskillz, gjdixon Homebuilt Systems : CosmonautX and 267 unknown users
Add a reply



 Word :   Username :  
 
Bottom
Author
 Thread : Presario 2700 (2710US) Power Problem (Heat?)
 
jay
Profile: stranger
More Information
n°58386
03-30-2005 at 05:49:28 PM

Archived from groups: alt.sys.pc-clone.compaq (More info?)

 

I have 2 Compaq Presario 2710US laptops, both with the same symptom.
When I power on, the fans kick on high speed almost immediately (well
before windows loads) then the system shuts off. I'm guessing heat
problems, both systems have been cleaned with pressurized air. I
contacted Compaq but they were little help. I've tried running linux
from a CD, no luck. I've updated the BIOS, no luck. Any ideas?

Related Pr oduct
 Register or log in to remove.

hh
Profile: stranger
More Information
n°58387
03-30-2005 at 10:39:05 PM

Archived from groups: alt.sys.pc-clone.compaq (More info?)

 

I know some Presario notebooks were shipped without the proper thermal
compound between the processor and heatsink. Have you checked that there is
thermal compound between them?

HH

"Jay" <JEOLeary@gmail.com> wrote in message
news:1112208568.704212.293600@z14g2000cwz.googlegroups.com...
>I have 2 Compaq Presario 2710US laptops, both with the same symptom.
> When I power on, the fans kick on high speed almost immediately (well
> before windows loads) then the system shuts off. I'm guessing heat
> problems, both systems have been cleaned with pressurized air. I
> contacted Compaq but they were little help. I've tried running linux
> from a CD, no luck. I've updated the BIOS, no luck. Any ideas?
>

Anonymous
More Information
n°58395
04-01-2005 at 10:05:18 PM

Archived from groups: alt.sys.pc-clone.compaq (More info?)

 

The 2700's are well known for the hold down lugs coming loose from the
systemboard. These fasten the Fan and heatsink to the CPU and thats
generally why the high fan at startup occurs. It requires resoldering
the lugs and some disassembly. Weve done a ton of these and if you
need help just yell.
www.ikenfixit.com

ajay
Profile: stranger
More Information
n°58513
04-22-2005 at 06:31:56 PM

Archived from groups: alt.sys.pc-clone.compaq (More info?)

 

I also have a Presario 2700 with this problem. Did you manage to
resolve it? If so I would be grateful if you would let me know what
to do.
Regards

Anonymous
More Information
n°58514
04-23-2005 at 01:28:56 AM

Archived from groups: alt.sys.pc-clone.compaq (More info?)

 

Yes we do have a repair for the issue and it should be permanent..
Requires replacing the holddowns or lugs w/standoffs and they have
been doing fine as of yet. Glad to help if we can.. Ken


Go to:
Add a reply
  Tom's Hardware UK and Ireland Forums » Systems » Compaq » Presario 2700 (2710US) Power Problem (Heat?)
 

Forum map
MyDiscussions.Net Forum, Version 2007.1
© 2000-2006 No1Dev
Page generated in 0.259 seconds
Google ads