Archived from groups: alt.sys.pc-clone.compaq (More info?)

Hello,
I have a Compaq Presario 6024US that came with an Intel Pentium 4 1.8Ghz
processor (mPGA-478, 400Mhz FSB,Willamette core).
I would like to know what my best case scenario would be for upgrading the
processor. In other words, what's the fastest P4 processor I can hope to
find to replace my 1.8Ghz unit?
 
Also, does anyone know if the mainboard that came with my CP 6024US is a
standard ATX form factor mainboard?  I would like move my PC into a better
case than the one that it came with, but I am not sure if the 6024US
mainboard is ATX compliant.
 
Thank you in advance for any assistance.
 
Paul_in_NC

Archived from groups: alt.sys.pc-clone.compaq (More info?)

Paul,
 
I'm not familiar with the Presario 6024US, but I did do some service work on a
Presario P4 system last spring.  The motherboard was standard microATX, and my
client replaced it with a generic Asus board, nVidia graphics card and larger
wattage power supply.  Seems like Compaq has finally gotten away from the
expensive and stupid nonsense of outfitting systems with non-standard parts and
attachments for the most part.
 
As for processors, the fastest processor with 400MHz FSB is a 2.8GHz Celeron, if
I recall well.  The questions always are whether or not a motherboard BIOS will
recognize and handle a faster processor and whether or not the board is designed
electronically to handle potentially lower voltage CPUs.  Intel has had a habit
of lowering CPU voltages as processor speeds increase, not to be a pain in the
ass for all of us, but to deal successfully with ever-increasing problems with
heat.  Intel (and AMD and VIA and Transmeta) also expends serious research
dollars on the design of chips that operate reliably at lower voltages.
 
.... Ben Myers
 
On Sun, 02 Jan 2005 21:47:07 GMT, "Paul_in_NC"
<paulwilliamsREMOVETHIS@THISTOOnc.rr.com> wrote:
 
>Hello,
>I have a Compaq Presario 6024US that came with an Intel Pentium 4 1.8Ghz
>processor (mPGA-478, 400Mhz FSB,Willamette core).
>I would like to know what my best case scenario would be for upgrading the
>processor. In other words, what's the fastest P4 processor I can hope to
>find to replace my 1.8Ghz unit?
>
>Also, does anyone know if the mainboard that came with my CP 6024US is a
>standard ATX form factor mainboard?  I would like move my PC into a better
>case than the one that it came with, but I am not sure if the 6024US
>mainboard is ATX compliant.
>
>Thank you in advance for any assistance.
>
>Paul_in_NC
>
>
>

Archived from groups: alt.sys.pc-clone.compaq (More info?)

I have this same machine...well most of it anyway. The original case
was damaged and I want to put the mobo in a generic case.  All I need
now is the pinouts for the LED/switch connector.  HP/Compaq told me
that this info is not available in their database and local HP
service centers won't give me the info.  Any ideas where I can
download this info?
 
Dominic

Archived from groups: alt.sys.pc-clone.compaq (More info?)

The easiest way to figure this out is to trace the wire leads from the connector
to front panel.  I hope you retained the original damaged case to do this.
 
About a year ago, I replaced a burned out Compaq Presario P4 motherboard with an
Asus board.  In so doing, I had to do a bit of rewiring of the case, but only
because the original Compaq front panel cable harness had a single integrated
plastic connector with a pinout that did not exactly match the Asus board.
Suffice it to say that the Presario P4 chassis has the same power LED, hard
drive LED and on-off momentary switch as a generic chassis.
 
It should not be to hard for you to figure this out by examination... Ben Myers
 
On 11 Feb 2005 21:17:26 -0500, dominic1234@hotmail-dot-com.no-spam.invalid
(dominic1) wrote:
 
>I have this same machine...well most of it anyway. The original case
>was damaged and I want to put the mobo in a generic case.  All I need
>now is the pinouts for the LED/switch connector.  HP/Compaq told me
>that this info is not available in their database and local HP
>service centers won't give me the info.  Any ideas where I can
>download this info?
>
>Dominic
>