How to fix Windows 10 error DPC Watchdog Violation

Tags:
windows 10 Watchdog
JamieKavanagh
By See all their Tutorials


DPC Watchdog Violation errors were very common when Windows 10 was first released. So much so that Microsoft had to release an update to tackle it. Originally it was caused by an SSD driver that was found to be incompatible with Windows 10. It is actually a repeat of an issue that occurred in Windows 8 when that was released too. If you find you need to fix the Windows 10 error DPC Watchdog Violation, this tutorial is for you.



The actual syntax is ‘DPC_WATCHDOG_VIOLATION’ and the error usually results in a memory dump being taken and a BSOD.

Fix Windows 10 error DPC_WATCHDOG_VIOLATION
The original fault was with the IDE ATA/ATAPI controller installed with Windows 10. The fix was to use a different driver.

1. Navigate to Control Panel, Hardware and Sound and Device Manager.
2. Open the IDE ATA/ATAPI controllers section.
3. Select the controller that says ‘SATA AHCI’, right click and select Properties.
4. Select the Driver tab and Driver Details. Make sure the driver is ‘iastor.sys’. If it is, carry on. If it isn’t, try another or move on to the next step.
5. Select Update Driver Software, Browse and Let me Pick from a list of devices.
6. Select ‘Standard SATA AHCI Controller’ from the list and install.

This process addresses the vast majority of DPC_WATCHDOG_VIOLATION errors in Windows 10. Otherwise, performing driver updates across the board is also considered effective. As a last resort, some users have also said updating their motherboard BIOS has also fixed the error.

Learn more about Windows 10 with these tutorials:
How to remove Recent Files from Windows 10 File Explorer
How to use Windows 10 without a Microsoft account
How to open firewall ports in Windows 10


Quote: