OCZ PC3-10666 Platinum Edition
Like Kingston, OCZ wants to appeal to the largest group of DDR3-1333 buyers by offering multiple models. Unlike Kingston, the "lesser" kit supplied by OCZ actually represents the company’s midrange parts, with the same CAS 7 timings as its competitor’s high-end parts.
That’s right, price shoppers will find an even cheaper Gold kit from OCZ, but the firm’s midrange Platinum Edition provides timings of 7-7-7-20. These are not just rated timings that require messing with BIOS to achieve, but are also found in the SPD values of this part number OCZ3P13332GK dual-channel 2 x1GB kit.
But this is where things get a little strange; OCZ’s Platinum Series is actually rated to run its full performance values at 1.70 volts, yet its SPD table allows these timings to be set at 1.50 volts. OCZ is one of the companies that historically have provided modules that simply weren’t bootable on some systems because its SPD values were too tight to operate at a motherboard’s default voltage (1.50 volts for DDR3).
The great news is that our modules were able to operate stably at full-rated timings without manually increasing the voltage from motherboard default 1.50 to OCZ’s recommended 1.70 volts. This was true for both our Gigabyte and Asus motherboards.
An SPD value of 761 MHz (DDR3-1522) at 8-8-8-23 timings provides extra room for new overclockers who are not yet familiar with manual changes, while SPD values for 571 MHz and 476 MHz translate downward to DDR3-1066 and DDR3-800 for lower FSB processors.
Latest Memory News
Latest Memory reviews
- 27/12 – Four High-End Quad-Channel DDR3 Memory Kits For X79, Reviewed
- 05/09 – Seven 8 GB DDR3 Memory Kits For Your AMD A75 Motherboard
- 18/04 – Eight 8 GB (2 x 4 GB) Memory Kits For P67 Express, Rounded Up
- 23/11 – Memory Upgrade: Is It Time To Add More RAM?
- 05/08 – A Tour Of The Kingston Memory Factory In Taiwan
One part on page 3 is a bit confusing to me:
"Because cycle time is the inverse of clock speed (1/2 of DDR data rates), the DDR-333 reference clock cycled every six nanoseconds, DDR2-667 every three nanoseconds and DDR3-1333 every 1.5 nanoseconds. Latency is measured in clock cycles, and two 6ns cycles occur in the same time as four 3ns cycles or eight 1.5ns cycles. If you still have your doubts, do the math!"
If I am reading this right, cycle time is the inverse of (1/2)*(DDR Data Rate or 333 for example). So 1/((1/2)*333)=.006006006 which rounds to 6 milli-seconds, not 6 nano-seconds.
Sorry for my confusion, but could someone please clarify for me?
I can not clarify...this is a good article, but im still anoyed at the spelling and punctuation in the articles...Im not one for utmost spelling and punction in informall chatting messaging etc (like this) but i am when its a published article, you wouldnt find a harry potter novel with spelling mistakes in it....
"and DDR3-1600 is called PC2-12800." Its surposed to say, PC3-12800 not...PC2-12800
On the first page mid way down ^^^
Therlian you got it wrong. Generally, period (cycle time) it's the inverse of frequency (clock speed). But as DDR stands for Dual Data Rate, its real frequency is 1/2 of the specified clock speed. What you did wrong it's that you didn't take in account that DDR-333 means a data rate of 333 MEGA-hertz. Because a hertz is the inverse of a second you get: 1/((1/2)*333 MHz)=.006 micro- seconds, which is equal to 6 nano-seconds. Hope I made it clear for you.
I see now danmari. Thanks for pointing that out. I don't know why I didn't think about the 333 being MHz as opposed to Hz.
"I can not clarify...this is a good article, but im still anoyed at the spelling and punctuation in the articles...Im not one for utmost spelling and punction in informall chatting messaging etc (like this) but i am when its a published article, you wouldnt find a harry potter novel with spelling mistakes in it...."
Sorry but when you make THAT many mistakes in your own post, you have no right to talk about spelling mistakes. The mistake you mention is a typo (hitting a wrong key) not a spelling error.
You however manage to spell "annoyed", "informal", and "supposed" wrongly. You also managed to spell "punctuation" wrongly (the second time.. not sure how you can spell it right the first time and wrong the second..)
If you don't know how to spell, then don't flame others for it.
anyone with notes PC2100,PC3200,PC4200,PC5300?
"Intel’s current fastest Front Side Bus (FSB) uses a 1333-MHz data rate"
No, that's not right!
It's 1600MHz (native) for a Socket 775 CPU and socket 771, and if you didn't notice, some people overclock, big time!
Although DDR3 is touted as using 1.50V, several modules use more!
The same is true of DDR2. In this article DDR2 is described as being 1.8V. In my experience most of the modules are 1.9V and some are higher.