Kingston HyperX PC3-11000
Kingston’s HyperX series represents modules that exceed the ratings of standard parts, and its PC3-11000 kit is actually rated for operation at 1375MHz. The rating is still close enough to the 1333 MHz "standard" data rate for these to be considered "enhanced DDR3-1333," however.
Part number KHX11000D3LLK2/2G provides a dual-channel kit of two 1-GB modules with blue heat spreaders, rated at 7-7-7-20 timing and 1.70 volts. The nonstandard voltage requires manual configuration in BIOS, and the modules default to a slower 533 MHz (DDR3-1066) in order to assure boot capability at a motherboard’s default 1.50 volts.
In fact, a DDR3-1333 SPD value isn’t even found in the HyperX SPD table, the highest 1.50 volt setting being 609 MHz at CAS 8. Yet, because this RAM defaults to rated timings at a slower clock speed, manual configuration is as easy as changing the speed and voltage in motherboard BIOS.
A 457 MHz SPD value is also able to be automatically configured for DDR3-800 operation when FSB-800 processors are used, while the 533 MHz DDR3-1066 value works for FSB-1066, FSB-1333 and FSB-1600 processors.
Latest Memory News
Latest Memory reviews
- 27/12 – Four High-End Quad-Channel DDR3 Memory Kits For X79, Reviewed
- 05/09 – Seven 8 GB DDR3 Memory Kits For Your AMD A75 Motherboard
- 18/04 – Eight 8 GB (2 x 4 GB) Memory Kits For P67 Express, Rounded Up
- 23/11 – Memory Upgrade: Is It Time To Add More RAM?
- 05/08 – A Tour Of The Kingston Memory Factory In Taiwan
One part on page 3 is a bit confusing to me:
"Because cycle time is the inverse of clock speed (1/2 of DDR data rates), the DDR-333 reference clock cycled every six nanoseconds, DDR2-667 every three nanoseconds and DDR3-1333 every 1.5 nanoseconds. Latency is measured in clock cycles, and two 6ns cycles occur in the same time as four 3ns cycles or eight 1.5ns cycles. If you still have your doubts, do the math!"
If I am reading this right, cycle time is the inverse of (1/2)*(DDR Data Rate or 333 for example). So 1/((1/2)*333)=.006006006 which rounds to 6 milli-seconds, not 6 nano-seconds.
Sorry for my confusion, but could someone please clarify for me?
I can not clarify...this is a good article, but im still anoyed at the spelling and punctuation in the articles...Im not one for utmost spelling and punction in informall chatting messaging etc (like this) but i am when its a published article, you wouldnt find a harry potter novel with spelling mistakes in it....
"and DDR3-1600 is called PC2-12800." Its surposed to say, PC3-12800 not...PC2-12800
On the first page mid way down ^^^
Therlian you got it wrong. Generally, period (cycle time) it's the inverse of frequency (clock speed). But as DDR stands for Dual Data Rate, its real frequency is 1/2 of the specified clock speed. What you did wrong it's that you didn't take in account that DDR-333 means a data rate of 333 MEGA-hertz. Because a hertz is the inverse of a second you get: 1/((1/2)*333 MHz)=.006 micro- seconds, which is equal to 6 nano-seconds. Hope I made it clear for you.
I see now danmari. Thanks for pointing that out. I don't know why I didn't think about the 333 being MHz as opposed to Hz.
"I can not clarify...this is a good article, but im still anoyed at the spelling and punctuation in the articles...Im not one for utmost spelling and punction in informall chatting messaging etc (like this) but i am when its a published article, you wouldnt find a harry potter novel with spelling mistakes in it...."
Sorry but when you make THAT many mistakes in your own post, you have no right to talk about spelling mistakes. The mistake you mention is a typo (hitting a wrong key) not a spelling error.
You however manage to spell "annoyed", "informal", and "supposed" wrongly. You also managed to spell "punctuation" wrongly (the second time.. not sure how you can spell it right the first time and wrong the second..)
If you don't know how to spell, then don't flame others for it.
anyone with notes PC2100,PC3200,PC4200,PC5300?
"Intel’s current fastest Front Side Bus (FSB) uses a 1333-MHz data rate"
No, that's not right!
It's 1600MHz (native) for a Socket 775 CPU and socket 771, and if you didn't notice, some people overclock, big time!
Although DDR3 is touted as using 1.50V, several modules use more!
The same is true of DDR2. In this article DDR2 is described as being 1.8V. In my experience most of the modules are 1.9V and some are higher.