Behavior At 24 Bits / 48 KHz

With 24-bit quantification and a sampling rate of 48 kHz, the card begins to show what it can really do. These settings are an especially good compromise between performance and reasonable file size. As a matter of fact, they're frequently used in professional applications. Dynamics and signal-to-noise ratio naturally jump much higher.

Frequency response : The frequency response widens very slightly at the top and is obviously still perfectly linear...

Noise level : 24-bit quantification shows the card's limits, with an extremely low noise level

Dynamic range : Dynamic capacity reached the maximum value possible given the other parameters!

Distortion : Distortion as such is on the same order as what we observed at 44 kHz. The lower noise level is what explains the difference in the figures (THD+N).

Intermodulation distortion : Values are still infinitesimal and there's no danger of distortion being audible

Stereo separation : There was a (relative) increase in stereo crosstalk in the upper part of the spectrum, but it's off the graph, below 1 kHz...