Benchmark Results: World in Conflict
At maximum settings with no AA or anisotropic filtering (AF) applied, World in Conflict is an obvious exercise in CPU bottlenecks. When the overclock is applied to the system, all of the frame rates increase to practically the same level.
When 4xAA and 16xAF are added to the mix, we see the stock system is still CPU-limited. However, the overclocked numbers are demonstrating a meaningful spread, indicating the graphics cards are becoming the bottleneck at these settings.
Once again, the $1,300 Micro-ATX system is proving itself to be a formidable gaming machine at maximum detail settings and a resolution of 1920x1200, while no overclocking is required.
7
Comments
Sponsored
Latest Build Your Own News
Latest Build Your Own reviews
- 23/12 – System Builder Marathon, Dec. 2011: System Value Compared
- 21/12 – System Builder Marathon, Dec. 2011: $600 Gaming PC
- 20/12 – System Builder Marathon, Dec. 2011: $1200 Enthusiast PC
- 19/12 – System Builder Marathon, Dec. 2011: $2400 Performance PC
- 14/12 – Power Supply 101: A Reference Of Specifications
I wonder why this system builder marathon was limited to Micro-ATX cases. Is there a general trend towards these things or what? I'm looking to build a whole new system soon and I can't see any reason to go Micro-ATX.
I don’t think it’s a trend, think of it as more of a challenge. Some people don’t want to have a giant full/mid tower sitting next to them.
Right, I don't mind that at all, so I'll stick to a normal case when assembling my next system. Thanks!
Nice challenge but what's the point when the system dies a couple of months down the line due to shorten life span of all components as a result of high temps. Then you spend another $1300?
I can't remember if it was this or one of the other SBM articles this month, but they mentioned something about these PCs being LAN boxes - if so heat is going to be even more of an issue (much higher ambient temps, cases right next to each other) so this system would be pretty unviable.
I know that my PC runs as much as 10 degress hotter in that environment - if it's in the low 90s on the CPU and at the limit of GPU stability already, another ten degrees will see it constantly throttling, making errors or shutting down.
Assuming that we were building a full ATX system, what would have been the motherboard of choice for this PC?
Can I also remind everyone that these articles are irrelevent on this side of the Atlantic? Intel and nVidia prices in particular are far, FAR lower in the US - such a system would be over 30% more over here! SLI GTX260 for £200 my arse!