Categories:

Test System And Methodology

02:28 - Friday 5 October 2007 by Don Woligroski
Source: THG – Keywords: comparing, water, coolers
Categories: Hardware

Test System And Methodology

Ad
System Hardware
Processor Intel Core Duo e6750, o/c to 3.68 GHz, 4MB Cache
Motherboard ASUS P5K, BIOS: 0507
RAM Wintec Ampo PC2-6400, 2x 1024 MB, CAS 5.0-5-5-16
Hard Drive Seagate Barracuda ST3320620AS
320 GB, 7200 RPM, 16 MB Cache, SATA 300
Networking PCIe Gb LAN controller featuring AI NET2
Graphics Cards EVGA GeForce 8800 GTS, 320MB RAM
Power Supply Cooler master Real power Pro 1250w
System Software & Drivers
OS Microsoft Windows XP Pro 5.1.2600
DirectX Version 9.0c (4.09.0000.0904)
Graphics Driver nVIDIA ForceWare 162.18

We will be comparing Swiftech’s H20-120 against CoolIT’s Freezone and Eliminator hybrid TEC/water cooling systems, which we think are targeted to the same demographic as the H20-120 Compact. The Eliminator has a similar price to the Swiftech H20-120. The Freezone is much more expensive than the Swiftech unit, but we’ll include the results for reference anyway.

When we tested the CoolIT Eliminator and Freezone in a previous review, we wanted to concentrate on how they stacked up against a true fully featured water-cooling system. However some of our readers expressed an interest in seeing how these systems compare to aftermarket air coolers, so we will be including Cooler Master’s HyperTX 2 air cooler in our benchmarks. Our readers also asked that we use these coolers on higher overclocks, so this time around we’re trying the competitors on an overclocked 3.68 GHz e6750 CPU.

The Swiftech H20-120 Compact will run its fan at 12v unless a 7v adapter is used. We tested the Swiftech with and without the 7v adapter.

Testing was done in a Gigabyte Aurora case with two 120mm exhaust fans on the back and a single 120mm intake fan on the front. One of the rear 120mm exhaust fans was removed to test the Freezone, Eliminator, and H20-120 because they had their own fans that required the space.

All testing was done at an ambient temperature of 23.5 degrees Celsius. Load temperatures were measured with a 20-minute run of Orthos.


Talkback
spuddyt 05/10/2007 05:05
Hide
-0+
spuddyt

maybe I'll use liquid cooling someday...

Note You are going to post a comment as anonymous.



Google Ads