Needed Overclocking Help

I get a unstable frame rate in both DOOM 2016 and Battlefield 3, prior I did get very good frame rates before but as soon as I reset the UEFI to its defaults I started getting unstable performance. I was getting 180-200 FPS in DOOM and a 140 to 186 fps in Battlefield 3 prior to reseting the UEFI. Now I am getting 90 fps to 200 FPS in DOOM and 86 to a 140 fps in Battlefield 3. If anyone could help me tweak my BIOS so that I could get those same exact frame rates again I would appreciate it. :)
Multi Core Enhancement: Enabled
CPU Ratio: Auto
CPU Cache Ratio: Auto
Minimum CPU Cache Ratio Auto
BCLK Frequency: Auto
BCLK Spread Spectrum: Disabled
Boot Performance Mode: Max Non-Turbo Performance
Reliability Stress Restrictor: Disabled
FCLK Frequency 800MHZ
AVX Ration Offset: Auto
BCLK Aware Adaptive Voltage: Enabled
Load XMP Setting: Auto
BCLK Frequency: Auto
DRAM Reference Clock: Auto
DRAM Frequency Auto
CAS # Latency (TLC) : 15/Auto
RAS# to CAS# Delay and Row Precharge (tRCDtRp): 15/Auto
RAS# Active Time (tRAS): 36/Auto
Voltage Vcore Voltage: Auto
CPU Load-Line Calibration: Auto
DRAM Voltage:1.350V/Auto
DRAM Activating Power Supply: 2.500V/Auto
PCH +1.0 Voltage: 1.000V/Auto
VCCI0 Voltage: 0.950V/Auto
VCCST Voltage: 1.000V/Auto
VCCSA Voltage: 1.050V/Auto
CPU Internal PLL Voltage: Auto
Here are my specs if needed.

Operating System
Windows 10 Home 64-bit
Intel Core i7 @ 4.20GHz 40 °C
Kaby Lake 14nm Technology
16.0GB Dual-Channel Unknown @ 2133MHz (15-15-15-36)
ASRock Z270 SLI Xtreme (CPUSocket) 32 °C
ASUS VS247 (1920x1080@60Hz)
8192MB NVIDIA GeForce GTX 1080 (EVGA) 54 °C
223GB Western Digital WDC WDS240G1G0A-00SS50 (SSD) 33 °C
931GB Western Digital WDC WD10EZEX-08WN4A0 (SATA) 33 °C
931GB Western Digital WDC WD10EZEX-08WN4A0 (SATA) 34 °C
476GB Samsung SSD 960 PRO 512GB (Unknown)
Optical Drives
High Definition Audio Device
Reply to BlazingAngels
No answers Last reply
More about needed overclocking
Ask a new question Answer

Read More

Overclocking Battlefield CPUs FPS Instability Performance DOOM