What can I overclock the Ryzen 7 1700 to with the Wraith Spire?

Currently its at 3.0 GHz which was what it came at, and I am wondering if I could bump it up to at least 3.6?
Reply to baerbrennan14
4 answers Last reply
More about overclock ryzen 1700 wraith spire
  1. 3.6-3.8 should be fine :)
    what motherboard do you have?
    Reply to vapour
  2. vapour said:
    3.6-3.8 should be fine :)
    what motherboard do you have?


    Thanks so much, can you please explain what I would have to do in ryzen master to set this up properly?

    Btw, MSI x370 I believe
    Reply to baerbrennan14
  3. nope, not ryzen master...
    manual in BIOS pls
    switch to expert OC mode
    find cpu multiplier and set to 36 first
    VCore voltage set to 1.3v
    save and exit, see if it boots. If boots, download prime 95 and do stress test, monitor cpu temp using Ryzen master, if more than 85, kill the test.
    If it doesn't boot, turn off psu when the pc is off (it will shut down automatically, you have a window of several seconds before it restarts automatically), remove CMOS battery for 30 secs and put back, turn on PSU, wait for 15 sec and press power, BIOS will be reset, increase VCore voltage by 0.0125 or so, and repeat. The goal is to reach ideal OC speed with lowest voltage and make sure it is stable with Prime95. Let me know if you have any questions.
    Reply to vapour
  4. vapour said:
    nope, not ryzen master...
    manual in BIOS pls
    switch to expert OC mode
    find cpu multiplier and set to 36 first
    VCore voltage set to 1.3v
    save and exit, see if it boots. If boots, download prime 95 and do stress test, monitor cpu temp using Ryzen master, if more than 85, kill the test.
    If it doesn't boot, turn off psu when the pc is off (it will shut down automatically, you have a window of several seconds before it restarts automatically), remove CMOS battery for 30 secs and put back, turn on PSU, wait for 15 sec and press power, BIOS will be reset, increase VCore voltage by 0.0125 or so, and repeat. The goal is to reach ideal OC speed with lowest voltage and make sure it is stable with Prime95. Let me know if you have any questions.


    Ty, will do tomorrow!
    Reply to baerbrennan14
Ask a new question Answer

Read More

Overclocking Spire