Help with Asus Prime Z270-A

Ok, so I bought the "Corsair Spec Alpha case" and it had a USB 3.0 in the case that I connected (it powered 2 front fans + fan controller) to my first motherboard "Gigabyte G1.Sniper B7 B150" that I made a mistake buying, so I got this new "Asus Prime Z270-A" when I connect them, my 2 front fans and controller aren't working, so I connected each alone as CHA-FAN2 and H_AMP_FAN but every time I boot the computer, I can hear them going (I'm only assuming this because of the sound) at full speed, it is very annoying and frustrating, even when idle... My question is, how do I stop them from going full speed at idle? Also another issue with my GTX 1070 SLI is after exiting a game, both GPUs stay at full clock and memory and fans also stay full speed...
Computer :
Old Mobo : Gigabyte G1.Sniper B7
New Mobo : ASUS Prime Z270-A
PSU : Cougar CMX V3 850-Watt 80 PLUS Bronze
CPU : i7-6700k
GPU : 2x Gigabyte GTX 1070 G1 Gaming
Case : Corsair Spec Alpha Red/Black
CPU Fan : Arctic Alpine 11 Pro Rev.2
SSD : Transcend SSD370 TS128GSSD370 128GB
HDD : Western Digital Caviar Blue WD10EZEX 1TB
Something that might help :
Page 18 & 19
Thank you.
Reply to maxrager12
2 answers Last reply
More about asus prime z270
  1. Confusing: *USB3.0 (powered 2 front fans + fan controller)*
    Reply to romirez
  2. romirez said:
    Confusing: *USB3.0 (powered 2 front fans + fan controller)*

    Sorry, it was my part that was mistaken, here's what I was dealing with :
    What I did was leave out the "fan controller power connector" and just connect the fans straight to the motherboard, which led them to run at full power blatantly for no reason, I connected the correct stuff and my fan controller is now controlling the fans, thank you and have a nice day!
    Reply to maxrager12
Ask a new question Answer

Read More

Asus Cases Corsair