Ryzen 5 1600x problems msi tomerhawk b350

When i try to overclock my ryzen 1600x it Boots but cpuz show a muliplikator of 22 but that is far Away from my settings .:??:
Reply to oomaxoo7
19 answers Last reply
More about ryzen 1600x problems msi tomerhawk b350
  1. oomaxoo7 said:
    When i try to overclock my ryzen 1600x it Boots but cpuz show a muliplikator of 22 but that is far Away from my settings .:??:


    Disable C6 and AMD Cool and Quiet in the bios and also set high performance mode in Windows.
    Reply to Seanie280672
  2. Dose not worke also
    Reply to oomaxoo7
  3. oomaxoo7 said:
    Dose not worke also


    Before it booted to windows, after you changed your setting in the bios, at anytime did it post loop, ie power on then off then on then off a few times before booting ?
    Reply to Seanie280672
  4. Not at all but somtimse the bios cant selekt my ssd as a Boot Drive
    Reply to oomaxoo7
  5. oomaxoo7 said:
    Not at all but somtimse the bios cant selekt my ssd as a Boot Drive


    OK, can you take a pict of the OC menu in the bios and post it here so I can see you settings.
    Reply to Seanie280672
  6. How do i poste piktures
    Reply to oomaxoo7
  7. oomaxoo7 said:
    How do i poste piktures


    upload the picture here: http://imgur.com/ just select new post button at the top

    then post the link it give you to the picture here.
    Reply to Seanie280672
  8. Can i just Text you the settings you want to know Sry
    Reply to oomaxoo7
  9. oomaxoo7 said:
    Can i just Text you the settings you want to know Sry



    Have a look at this video of mine, this was on a MSI Mortar B350m, the Tomahawks little brother, using an R7 1700 and 16gb of G.Skill tirdent Z RGB ram, dont copy them, its just for you to compare to see if youve adjusted similar settings, for now leave your ram at stock speeds which will be 2133mhz, this narrows the problem down. https://youtu.be/JaQgj3PPTu8

    Another question, is your bios up to date ?
    Reply to Seanie280672
  10. Why so you set an higer NB Voltage
    Reply to oomaxoo7
  11. oomaxoo7 said:
    Why so you set an higer NB Voltage


    helps with memeory overclocking so I could get my RAM to run at 3200mhz, you wont need to change that for now if you leave your RAM at stock speeds (2133)

    Also, is your bios up to date ?
    Reply to Seanie280672
  12. The bios is up to Date and all the
    Settings can't help
    Reply to oomaxoo7
  13. oomaxoo7 said:
    The bios is up to Date and all the
    Settings can't help


    It seems like its a problem with the bios, have a look here at similar issues: https://forum-en.msi.com/index.php?topic=285532.0 these were all fixed with a bios update by the way.
    Reply to Seanie280672
  14. I already read this but it cant help and i am Shure i got the latest bios
    Reply to oomaxoo7
  15. oomaxoo7 said:
    I already read this but it cant help and i am Shure i got the latest bios


    Which bios version does it say you have in the bios, its at the top right corner of the screen in the EZ mode ?

    Also, try clearing this bios if you are sure you are on the latest, use the jumper on the motherboard, not by removing the battery, this rarely works.

    Latest version is E7A34AMS.150
    Reply to Seanie280672
  16. Thanks Fore helping
    Reply to oomaxoo7
  17. My pump died now every Thing is shit:fou:
    Reply to oomaxoo7
  18. oomaxoo7 said:
    When i try to overclock my ryzen 1600x it Boots but cpuz show a muliplikator of 22 but that is far Away from my settings .:??:


    oomaxoo7 said:
    My pump died now every Thing is shit:fou:


    I have the exact same Processor, Motherboard, and issue. does yours work fine in standard clock?
    Reply to tkorb6
  19. Get the lastest bios version, I think its E7A34AMS.180 My 1600X on a MSI B350 Tomahawk with G.Skill ripjaw4 3000 wouldnt oc until I flashed the bios to newest version. Once I did, I oc'd the CPU to 3.9Ghz and with A-XMP2 the ram to 2933Mhz with ZERO issues. I just manually entered 3900 in the CPU freq and selected a-xmp 2, i didnt changed anything else, left it all auto. PC has been running a week now at those setting and no issues.
    Reply to rick.lane67
Ask a new question Answer

Read More

Overclocking MSI-Microstar