[Need Help] Not able to install Windows 10 or other in My New Ryzen 5 1600 rig

I am trying to install Windows 10 using USB pendrive on my new rig , but during installation , when it is installing , PC gets crashed during installing (bluescrren ) and this heppens again and again , please help

I have already tried different os and usb pedrives ,tried different softwares to make it bootable .

My rig
2x8 GB corsir 2400 Mhz DDr4 ram
Ryzen 5 1600 CPU
Msi b350m bazooka motherboard
Corsair vs 650 W PSU
Asus Strix GTX 1070 Oc GPU

Please help me , I'm not able to use my built
Reply to ashish1999
3 answers Last reply Best Answer
More about install windows ryzen 1600 rig
  1. RAM tends to be one of the highest sources of issue with Ryzen. If you tried to set the RAM clock I would suggest to reset back to default. Your RAM may only work at say 2133 or even lower.
    Reply to elbert
  2. I'd also try installing with only one RAM module and removing the graphics card until the install is complete.

    -Wolf sends
    Reply to Wolfshadw
  3. Best answer
    Ryzen has no iGPU so without the Gfx card it won't boot. Try to change settings to optimised default . If you have the motherboard CD remove it and try to install windows. Check whether you have created USB drive properly GPT partition for windows 10 since I had the same issue. As the guy above try removing the RAM and install a single stick to check whether it works. Don't overclock for now since Ryzen is not that stable with memory overclock
    Reply to Raju_29
Ask a new question Answer

Read More

windows 10 USB