Solved

How to manualy overclock G.SKILL TridentZ RGB Series to (3200)? (8gb x 2) 16 GB

How Do i overclock this ram? its not running at 3200 and when i try to use XMP windows outputs Critical_error_Died error and wont boot windows 10 so that's why i want to do it manually.

F4-3200C14D-16GTZR

Specs: Intel i7 7700k, Asus Strix z270E, G.skill 16Gb (3200), Geforce GTX 1080, 750W powersupply
3 answers Last reply Best Answer
More about manualy overclock skill tridentz rgb series 3200 8gb
  1. Best answer
    Tested Speed 3200MHz
    Tested Latency 14-14-14-34-2N

    1) Change Ai Overclock Tuner from [Auto] to [Manual].

    2) Change DRAM Frequency setting from [Auto]. The Auto setting will give you 2133MHz.

    3) DRAM Timing Control
    First setting is CAS# Latency. This number is listed as 14. Change settings from [Auto]
    Next setting is also 14
    Third setting is 14
    Fourth number is 34
    DRAM COMMAND Rate is changed from [Auto] to [2N]

    4) Memory is listed as using 1.35v DRAM voltage at tested speed of 3200MHz.
    This setting is listed on page 33 of the manual. Leaving on [Auto] will only give 1.2v
  2. Not trying to hijack the thread, I'd like clarification on the command rate and what it means.

    Also in the Asus boards the middle two numbers are changed by the second setting. Theres only three numbers and then the command timing option.
  3. Calvin7 said:

    Tested Speed 3200MHz
    Tested Latency 14-14-14-34-2N

    1) Change Ai Overclock Tuner from [Auto] to [Manual].

    2) Change DRAM Frequency setting from [Auto]. The Auto setting will give you 2133MHz.

    3) DRAM Timing Control
    First setting is CAS# Latency. This number is listed as 14. Change settings from [Auto]
    Next setting is also 14
    Third setting is 14
    Fourth number is 34
    DRAM COMMAND Rate is changed from [Auto] to [2N]

    4) Memory is listed as using 1.35v DRAM voltage at tested speed of 3200MHz.
    This setting is listed on page 33 of the manual. Leaving on [Auto] will only give 1.2v


    I'm having this problem on a Asus Prime z270-A board right now as well.

    Can you clarify the COMMAND timing option Staplergun is asking about?
Ask a new question

Read More

Overclocking G.SKILL RAM Memory