Hi, I’m Florinn. Please, I need your help!
I built a new computer and I have trouble setting it up. At startup goes through POST and ends up asking me to recover the BIOS setting. But pressing “F1” doesn’t do anything… I can’t get into BIOS, doesn’t matter what I do. On the Motherboard I get “A2” code error and a BOOT DEVICE red LED. Now… I’m not new at this; I build my own PCs since early ‘90s (at least one every year), always using Asus motherboards, and never got in trouble… till now. I tried everything the manual says, everything that I could think of, and every suggestion I got from other people… but same results. Same screen, same A2 error, same red LED… I hope you guys can help.
Here are my components:
1. Asus X99-DELUXE/U3.1 motherboard
2. Intel i7-5960X CPU (LGA2011V3)
3. G.SKILL F4-2800C15Q2-64GRK DDR4-2800 PC4-22400 8192MBx8 memory
4. Seagate ST6000NM0024-1HT17Z hard drive
5. LG GH22LS40 DVD drive
6. XFX R9-290X-8DFD graphic card
7. Corsair AX860 power supply
8. Asus Logitech K800 Keyboard and MX Master Mouse
9. PB287Q 4K monitor
Here is what I get on the screen at startup:
AMIBIOS (C) 2014 American Megatrends, Inc.
ASUS X99-DELUXE ACPI BIOS Revision 1601
CPU: Intel (R) Core (TM) i7-5960x CPU @ 3.00GHz
Speed: 3000MHz
Total Memory: 65536MB (DDR4-2133)
USV Devices total: 0 Drive, 1 keyboard, 1 mouse, 4 Hubs
Detected ATA/ATAPI Devices…
P1: ST6000NM0024- 1HT17Z
P2: HL-DT-ST DVDRAM GH22LS40
Please enter setup to recover BIOS setting.
When RAID configuration was build, ensure to set SATA Configuration to RAID mode.
Press F1 to Run SETUP
I built a new computer and I have trouble setting it up. At startup goes through POST and ends up asking me to recover the BIOS setting. But pressing “F1” doesn’t do anything… I can’t get into BIOS, doesn’t matter what I do. On the Motherboard I get “A2” code error and a BOOT DEVICE red LED. Now… I’m not new at this; I build my own PCs since early ‘90s (at least one every year), always using Asus motherboards, and never got in trouble… till now. I tried everything the manual says, everything that I could think of, and every suggestion I got from other people… but same results. Same screen, same A2 error, same red LED… I hope you guys can help.
Here are my components:
1. Asus X99-DELUXE/U3.1 motherboard
2. Intel i7-5960X CPU (LGA2011V3)
3. G.SKILL F4-2800C15Q2-64GRK DDR4-2800 PC4-22400 8192MBx8 memory
4. Seagate ST6000NM0024-1HT17Z hard drive
5. LG GH22LS40 DVD drive
6. XFX R9-290X-8DFD graphic card
7. Corsair AX860 power supply
8. Asus Logitech K800 Keyboard and MX Master Mouse
9. PB287Q 4K monitor
Here is what I get on the screen at startup:
AMIBIOS (C) 2014 American Megatrends, Inc.
ASUS X99-DELUXE ACPI BIOS Revision 1601
CPU: Intel (R) Core (TM) i7-5960x CPU @ 3.00GHz
Speed: 3000MHz
Total Memory: 65536MB (DDR4-2133)
USV Devices total: 0 Drive, 1 keyboard, 1 mouse, 4 Hubs
Detected ATA/ATAPI Devices…
P1: ST6000NM0024- 1HT17Z
P2: HL-DT-ST DVDRAM GH22LS40
Please enter setup to recover BIOS setting.
When RAID configuration was build, ensure to set SATA Configuration to RAID mode.
Press F1 to Run SETUP
Facebook
Twitter
Instagram