Serial ATA Configuration: With Or Without RAID
After starting up a system with the Southbridge ICH5, one of the menu items in the BIOS immediately catches the eye: "IDE Configuration." And, as a matter of fact, many possibilities are available here. So, how would you like to configure your system today?
The point marked in the screen shot shows you which controller will be activated. We used both for our tests. The "Combined Mode Option" determines the primary device; the BIOS then uses this for the system start. Here, you can activate both channels of the UltraATA controllers individually.
"S-ATA Ports Definition" lets you choose which port should be the designated primary device. Thus, you can attach two S-ATA drives, each with a different operating system. Switching the primary ports takes place at the BIOS startup by pressing a key and/ or via submenu - the implementation is solely dependent on the motherboard manufacturer.
Last but not least, it's interesting that you can configure the Serial ATA controller as a RAID device. When this menu item is activated, the controller appears with its own BIOS during bootup:
The structure of this BIOS utility is similar to that of other RAID controllers. The menu allows you to set up and remove RAID arrays in mode 1 (striping) or 2 (mirroring). In conjunction with this, Windows recognizes the corresponding drive. After successfully installing a drive or setting up an array, the controller shows the following status during bootup:
Excellent! Maybe this is where I'll get some help because I'm struggling with Intel (R) Server Board Embedded RAID. I'm getting a Warning that the configuration could not be resolved when the machine boots up. Takes me to the RAID CU and when I View the configuration it says the logical disk is offline. How do I get it online?
Hehe old threads are sooo funny xD