Powercolor Radeon X1900 XTX - Overclocking And Heat
Powercolor Radeon X1900 XTX - Overclocking And Heat
The default clock speeds are given as 500/594 MHz (GPU/memory) in the driver's "information center". The overclocking presets in the overdrive tab of the driver read out as 648/774 MHz. (All of our X1900 XTX samples came with this combination of frequencies preset in the overdrive section.) In order to overclock the card, the automated clock configuration utility has to be run first, which takes a few minutes; accepting the speeds suggested by the utility automatically selects them. The Powercolor X1900 XTX can be overclocked to a maximum frequency of 690/800 MHz, which increases its overall performance by 2.5 percent. The memory frequency displayed in the screenshot refers to the physical clock speed; as usual, since this is DDR memory, the clock speeds are doubled in the technical specifications.
This chip is a hot piece of hardware indeed. While it idles at a moderate 54°C in 2D mode, it reaches up to 94°C under extended 3D load. The chip seems to cope with the heat quite well, but the cooler makes a good deal of noise.





- Previous page Powercolor Radeon X1900 XTX - Tools...
- Next page Sapphire Radeon X1300
- Nvidia Goes For Four: Quad SLI Gaming Dissected
- Is the KuFormula VF1 Plus the Formula for Graphics Cooling?
- Thermaltake Tide Water Tackles GPU Heat
- Sapphire Gets Hot by Going Cool
- Interactive VGA Charts 2006 Kickoff
- ATI and Nvidia's Same-Day Mega-Launch Mayhem
- Nvidia's GeForce 7800GS Becomes a Better Buy
- ATI's Radeon X1900 Heats Up With 48 Pixel Pipelines
- Squeezing Value Out of Lower-End Cards
- Two's Company, Four's a WOW! Sneak Preview of the NVIDIA Quad GPU...