Gainward Golden Sample BLISS 6800 GS PCX - Overclocking And Heat
Gainward Golden Sample BLISS 6800 GS PCX - Overclocking And Heat
You can forget about overclocking this card any further, as the Gainward Golden Sample has already been pushed close to its clock speed limit. While the default speed of a GeForce 6800 GS is specified at 435/1000 MHz (GPU/memory), Gainward guarantees the card will run at its increased clock speed of 485/1300 MHz. It would be unwise to risk the warranty just to squeeze out a few more MHz. For those that don't need the performance boost, the default clock speeds are just a click away, thanks to an option in the ExperTool.

The flat one-slot cooler keeps the chip's temperature under control. In 2D mode, the temperature lay at around 45°C, rising to 64°C under 3D load. These measurements were taken with the "Dynamic Speed" option selected in the ExperTool. Selecting the "Fixed Speed" option allows manual adjustments; in other words, the user can choose to run the fans at a slower speed, decreasing the noise level at the cost of an increase in heat.


- Previous page Gainward Golden Sample BLISS 6800 GS...
- Next page Gecube Radeon X1900 XTX
- Nvidia Goes For Four: Quad SLI Gaming Dissected
- Is the KuFormula VF1 Plus the Formula for Graphics Cooling?
- Thermaltake Tide Water Tackles GPU Heat
- Sapphire Gets Hot by Going Cool
- Interactive VGA Charts 2006 Kickoff
- ATI and Nvidia's Same-Day Mega-Launch Mayhem
- Nvidia's GeForce 7800GS Becomes a Better Buy
- ATI's Radeon X1900 Heats Up With 48 Pixel Pipelines
- Squeezing Value Out of Lower-End Cards
- Two's Company, Four's a WOW! Sneak Preview of the NVIDIA Quad GPU...